Wheels

Running V-Grooved Wheels on inverted angle iron track is a popular and low-cost method of moving loads in a production-line flow. 

These premium wheels are machined from solid 303 stainless steel. and are engineered to perform in heavy-duty industrial applications. They are popular in sanitary and corrosive environments common in salt marine, food processing, and wet environments.

Heavy-duty hubs, thick treads and slab-sided cores contribute to unmatched load capacity and resistance to chipping and cracking.

Available in a wide range of 3" to 6” diameter wheels stock sizes, custom wheels are available from 2" to 14" diameter.

All stainless steel v-groove models are offered with plain bore, stainless roller bearings and stainless steel precision ball bearings.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

Bestway’s cast steel wheels offer an excellent combination of strength, durability, and value.

These easy-rolling wheels offer good load-bearing capability and are an inexpensive alternative to forged, ductile, and malleable iron wheels.

Bestway BAL series wheels are molded under extreme pressure using fiber-reinforced phenolic resin. They offer good durability and floor protection in commercial and industrial applications and are often used in place of steel wheels.   

Our phenolic material is resistant to water, oil, and grease, and will not spark.  A hardness rating of 90 Shore (D) Durometer ensures excellent durability, impact resistance, floor protection, and reduced rolling noise compared to steel wheels 

A wide selection of wheel sizes and bearings are available, we also offer high capacity and high temperature versions of these wheels.

Running V-Grooved Wheels on inverted angle iron track is a popular and low-cost method of moving loads in a production-line flow.

These Stainless Steel V-groove wheels have been engineered to perform in heavy-duty industrial applications. They are popular in sanitary and corrosive environments common in salt marine, food processing, and wet environments.

These premium wheels are machined from solit 303 stainless steel.

Heavy-duty hubs, thick treads and slab sided cores contribute to unmatched load capacity and resistance to chipping and cracking.

Available in a wide range of 3" to 6” diameter wheels stock sizes, custom wheels are available from 2" to 14" diameter.

All stainless steel v-groove models are offered with plain bore, stainless roller bearings and stainless steel precision ball bearings.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.

These wheels are high-pressure molded from fiber-reinforced phenolic resin. Phenolic wheels are non-marking, resist corrosion from oil, water, grease, and commonly used acids or solvents, and do not spark.

These wheels are easy to start and roll while offering much better floor protection than steel or iron wheels.